A co-polymer emulsion-based specific wall texture.

Available in any in-built color and a variety of designs as per the client’s requirement.
Various color options are available.

Providing and applying 2-3mm thick ‘Stone Finish’ plaster made of copolymer binders and fine naturally coloured marble powders as per the required design and pattern (approved by the architect/engineer) including 1 coat of base primer required on Sub-base to hide the plaster walls. The above application is to be carried out on the base of single coat / double coat smooth mala plaster.

Raw Material

Various sizes of naturally colored marble powders, copolymer emulsions, cellulose thickeners, additives, biocides, and water, etc.

Process

Water and cellulose thickeners are added in the steril with additives, following various emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.

• Application Tool: Steel Trowel, Masking Tape
• Thinner: Water
• Mixing Ratio: 1-3 % maximum
• Packing:  25 Kg Bag

Coverage:

• 65-75 Sqft per 25 Kg Bag.

It may vary with the sub-base condition & application method, film thickness applied.

The surface must be cleaned from chalk and debris and free from any undulation.

A base coat of primer of relevant color is applied on the plastered surface using a roller or brush.

Material is applied using a trowel to get the required design; water can be added in for easier application depending on the requirement.

Drying time is 24 hours depending on weather conditions.

Shelf Life:

The shelf life of the packed bag is up to 6 months from the date of manufacturing.